This isn't what you were doing in your earlier post (ignoring the filtering for now). The "Control Room Out" is post-Master Bus Compressor, so hooking it to the sidechain input is not equivalent to enabling the master bus compressor with no sidechain. You're creating a feedback loop where the compressed signal is fed back into the sidechain input. At least that's my impression of what's happening.Not the same thing , then you're filtering the whole signal .You can also put the master bus compressor in the master inserts and add any filtering you need.
I am talking about filtering the global out and use this as signal to which the compressor reacts too , the compressor still compresses the whole signal including the low end , but the detector signal is devoid of the low end
That's how it's done 99% of the time , you eliminate the low end
You might be able to sidechain as you describe if you enable "Inserts Pre Compressor" on the main mixer and split the signal from within the master inserts. I've not tried it myself, so I don't know if that would introduce latency.
Statistics: Posted by Pepin — Sun Jun 02, 2024 3:04 am